HeliBar | Structural Repair
HeliBar is a helical stainless steel reinforcing bar, with substantial tensile properties, used for strengthening and stabilizing masonry in both new build and remedial situations.
HeliBars, of differing lengths depending upon the application, are the principal components of the Helibeam System.
RANGE OF USE
Bonded into cut slots at pre-determined levels in the masonry using HeliBondthixotropic cementitious grout, it is the composite action between the HeliBars and HeliBond that provides the core element of the Helibeam System, making it such a versatile, reliable and successful masonry repair system.
In long lengths, normally in pairs, they are used to form masonry beams that secure large areas of masonry, distributing the structural loads and overcoming various problems caused by foundation movement. They are also installed in the existing masonry to unobtrusively create or reinstate failed lintels. In shorter 1m lengths, HeliBars are used individually to perform reliable and permanent crack stitching
HeliBar starts as round stainless steel wire with a typical 0.2% proof stress of 500N/mm² but after the cold forming manufacturing process that creates the helical hi-fin design, this more than doubles to around 1100N/mm². This means that HeliBar, with its relatively small diameter, provides substantial tensile properties to the masonry, particularly when combined with HeliBond grout which locks between the fins and bonds to the masonry. Consequently, the well-proven Helibeam System has a variety of remedial and new build applications.