MB 2K.jpg
Container Size:
5L / 10L
Approx Coverage:
5 - 7sq/m per litre
Shop Now
Silicate Masonry Paint | Earthborn Selection
Our durable, highly breathable Silicate Masonry Paint. A sound alternative to conventional masonry paints and limewash. It must be used with Silicate Primer.
RANGE OF USE
It can be used on interior and exterior mineral surfaces e.g. stone, masonry, concrete, pebble dash, plaster and sound silicate-based paint surfaces. It is especially suitable for renovations.


Note: Earthborn Ecopro Silicate Masonry Paint should not be applied over conventional ‘plastic’ masonry paints. Some clay surfaces may require special treatment

Related Products

Claypaint.jpg

Earthborn Selection - Interior Paint

Clay Paint

Non-smell, Eco and Asthma- Friendly paint

Earthborn Silicate Primer.jpg

Earthborn Selection - Exterior - Primer

EcoPro Silicate Primer

Earthborn Ecopro Silicate Primer is a base coat primer for use with Ecopro Silicate Masonry

Isolating Primer.png

Earthborn Selection - Interior - Primer

Isolating Primer

Perfect for treating dry stains before overpainting with water based paints such as Earthborn Claypaint or Lifestyle Emulsion.

Earthborn Emulsion Matt.jpg

Earthborn Selection - Interior Paint

EcoPro Emulsion

Ecopro Matt Emulsion is a low odour, high performance, environmentally sound alternative to conventional emulsions.

Eggshell No. 17.jpg

Earthborn Selection - Interior & Exterior - Paint

Eggshell No.17

Earthborn Eggshell No.17 is a durable, washable and scuff resistant environmentally friendly paint suitable for interior woodwork.

Earthborn Silicate Masonry.jpg

Earthborn Selection - Exterior Paint

EcoPro Silicate Masonry

Ecopro Silicate Masonry Paint is a highly durable mineral paint that dries to a classic, matt finish.

Multi-Purpose-Primer-2_edited.png

Earthborn Selection - Interior - Primer

Multi Purpose Primer

Earthborn Multi Purpose Primer provides a perfect base coat on interior wood, melamine and MDF surfaces.

 
function startup() { colorWell = document.querySelector("#colorWell"); colorWell.value = defaultColor; colorWell.addEventListener("input", updateFirst, false); colorWell.addEventListener("change", updateAll, false); colorWell.select();