top of page
White Concrete House

Restoration & Structure Repair 

Concrete
Repair

Modern Home

Concrete Repair |  Concrete Walls | Concrete Floors | Concrete Steps

Betofix RM.png
Betofix R2_edited.png
Remmers KSE 100.png

Stone Strengthener

The structure of mineral building materials that are exposed to the weather is always weakened. This weakness is usually caused by an expansion of the original pore structure, rarely by a real loss of binding agent. The central task of a consolidation measure is to specifically fill the pore spaces created as a result of the weathering. This occurs by penetration of an additional nature-identical binding agent.

Concrete Repair

Despite the high quality and special qualities of concrete, damage can occur that requires maintenance, repair and protection. A distinction must be made between environmental influences and production faults with respect to concrete damage. Environmental influences can include exhaust fumes, acid rain, frost and de-icing salts. Here, the chemical properties are changed so that the steel reinforcements in the concrete start to rust. Shrinkage cracks, pipes, gravel pockets and insufficient concrete cover are typical production faults that also promote corrosion of the reinforcements.

Cracked Concrete Wall

Structural Repair

Concrete replacement systems for structural stability-relevant repairs show their versatility in applications that range from full-surface use on civil engineering construction works through to the re-profiling of extremely exposed building components in areas treated with de-icing agents. One special property is the high resistance when used with water containing sulphates.

Quick Repair

The concrete repair systems by Remmers can be used to protect against corrosion and coat everything in just one day. It is not worth travelling to a building twice to carry out a small repair job on e.g. balcony tiles or railings. It is therefore essential to have a fast product system that works with a few matched products and, at the same time, has very good workability characteristics.

Modern Bridge
Betofix R4_edited.png
Red Brick Building
Betofix R2_edited.png
Remmers KSE 100.png
Concrete Repair.jpg
Betofix RM.png

Our Products

Our Products
Betofix RM.jpg

Facade Restoration - Concrete Repair - Walls - Coving

Betofix RM

 

Fast repair mortar PCC (RM) for repairing concrete structures

Sp Levell .jpg

Facade Restoration - Render Repair - Wall Levelling (straightening) - Breathable

SP Levell

Salt storing, WTA-compliant pore undercoat render in the restoration render system for masonry subjected to moisture and salt loads

VM Fill (Compound Mortar).jpg

Facade Restoration - Compound Mortar - Reinforcement - Cement Repair

VM Fill

Universal cementing and reinforcement mortar

Remmers KSE 100.png

Facade Protection - Stone Strengthner - Stone Repair - Breathable

KSE 100

Clear, hydrophobising, solvent-based impregnation on a silane/siloxane base

Betofix R2.jpg

Facade Restoration - Concrete Repair - Walls - Flooring

Betofix R2

Fast repair mortar with higher strength for flooring. 

SP Prep Mortar.jpg

Facade Restoration - Render Repair - Prep Mortar - High adhesion - Breathable

SP Prep Mortar

WTA-compliant preparatory mortar

Multi Fill.jpg

Facade Restoration - Very Fine Filler - Breathable - Repairs - Feathering

Multi Fill [basic]

Filling compound and surface filler

SNL Clear.png

Facade Protection - Stone Strengthner - Stone Repair - Breathable

KSE 300

Solvent-free stone strengthener on a silicic acid ester base

Betofix R4.jpg

Facade Restoration - Concrete Repair - Walls - Flooring - Structural repairs

Betofix R4

Fibre-reinforced PCC for static renovation of concrete structures

SP Top White .jpg

Facade Restoration - Restoration Render - Breathable 

SP Top White

WTA-compliant restoration plaster for masonry with moisture and salt loads

FM NB Joint Mortar.png

Facade Restoration - Joint Mortar - Breathable 

FM NB

Cement-lime jointing mortar for new buildings

bottom of page
function startup() { colorWell = document.querySelector("#colorWell"); colorWell.value = defaultColor; colorWell.addEventListener("input", updateFirst, false); colorWell.addEventListener("change", updateAll, false); colorWell.select();