
Heritage Building Supplies & Solutions
RESTORING THE PAST, CONSERVING THE FUTURE


Impregnation Sealers | Breathable Paint | Restoration Mortar | Concrete Repair
Impregnation Sealers
Thanks to hydrophobizing impregnation, the capillary water absorption of a façade through rain and splashwater is significantly reduced. The water repelling, hydrophobic treatment is therefore a sensible damage-preventing and/or supplementary measure.

Breathable Paint
Alternatively to impregnation, the water-repellence of the façade can also be achieved using a silicone resin paint. Our selection of breathable façade paints come in a range of colours and can be tinted in store.



Restoration Mortar
The Remmers Restoration Mortar system was specially developed for supplementing mineral building materials or replacing them.
Concrete Repair
Despite the high quality and special qualities of concrete, damage can occur that requires maintenance, repair and protection. A distinction must be made between environmental influences and production faults with respect to concrete damage. Environmental influences can include exhaust fumes, acid rain, frost and de-icing salts. Here, the chemical properties are changed so that the steel reinforcements in the concrete start to rust. Shrinkage cracks, pipes, gravel pockets and insufficient concrete cover are typical production faults that also promote corrosion of the reinforcements.




Remmers Restoration Mortar (RM) is a ready-to-use, pre-mixed, dry mortar made of mineral binders and aggregates. Its physical characteristics correspond to the requirement for the lowest possible inherent stress and physical-mechanical properties that are coordinated to the natural stone substrate (compressive and bonding strength water transport, etc.). Used for restoring, supplementing, and re-profiling mineral substrates such as natural stone, brick, concrete, and synthetic stone. It can also be used to reproduce ornamental building elements in a tamping procedure.
The building façade is the 'face of a building'. It plays the major part in the appearance and visual impact of a building and importantly building façades are as varied and individual as peoples faces. And they need to be cared for and protected just as individually.
Cosmetic repairs are not enough; only technically correct protection, precisely adapted to the local problem areas, can provide a sustainable solution. Conservation Technology is the true building cleaning supply specialist
Our Products
RM
Multi-functional building waterproofing Combines the properties of flexible and crack-bridging mineral waterproofing grouts
Betofix R2
For subsequent cellar waterproofing from the interior against ground damp, non-standing or standing seepage water, water pressure and water acting from behind
Funcosil SNL Odourless
Clear, hydrophobising impregnation on a silane/siloxane base with odourless solvents
Betofix R4
Waterproofing mortar in a grouting and filling consistence for fast and reliable waterproofing of buildings
Multi Fill [basic]
Hydrophobising impregnation on a silane/siloxane base in aqueous emulsion form
Clear, hydrophobising impregnation agent on a silane/siloxane base for limestone
Color LA
"True" silicone resin paint with film preservative for surfaces at risk of infestation with algae or fungi
Color PA Fill
Quartzite filled, fibre-reinforced intermediate coating for levelling out concrete surfaces
Funcosil FC
For hydrophobizing impregnation of porous, cementitious building materials such as brick, clinker, sand-lime .Etc.
Color Si
Washable silicate interior wall paint in the iQ-Therm system, free from solvents and plasticisers