Prompt Natural Cement | Natural Selection - Natural Lime Products

top of page

RESTORING THE PAST, CONSERVING THE FUTURE

RESTORING THE PAST, CONSERVING THE FUTURE

+353 (1) 455 9511

info@conservationtech.ie

RESTORING THE PAST, CONSERVING THE FUTURE

< Natural Hydraulic Lime

Fast Setting Cement

Helifix Crack Stitching Kit Contec .png

Prompt Natural Cement | Natural Selection

VICAT

Description:

Vicat Prompt Natural Cement is made from an extremely hydraulic agrillaceous limestone that is fired at low-moderate temperatures and then ground to a powder.

Weight / Size:

25Kg

Approx. Coverage:

-

Product Info:

Technical Data Sheet

Safety Data Sheet

Vicat Prompt Natural Cement can be used to gauge traditional lime mortars and plasters, as well in situations that require rapid setting or exceptionally high compressive strengths.

Products

See the full range of products

Otterbein NHL 2.png

Natural Hydraulic Lime

Otterbein NHL 2

Otterbein NHL 2 is a natural hydraulic lime that delivers the perfect balance of strength and breathability.

NHL 2_edited.png

Natural Hydraulic Lime

Secil NHL 2

Secil 2 can be used for internal plastering. Can be used with fine sand for skim coat.

NHL 3.5 Transparent.png

Natural Hydraulic Lime

Secil NHL 3.5

Secil NHL 3,5 is ideally suited for bedding, rendering and pointing.

NHL 5_edited.png

Natural Hydraulic Lime

Secil NHL 5

Secil NHL 5 is normally used for flooring such as limecrete floors or in highly exposed locations such as chimney flaunching etc.

RT 3.5 Grey Transparent.png

Natural Hydraulic Lime

RoundTower NHL 3.5 Grey

Used mainly for masonry and external plaster works. The most popular material for new build work.

Roundtower 3.5 White.png

Natural Hydraulic Lime

RoundTower NHL 3.5 White

Used mainly for masonry and external plaster works. The most popular material for new build work.

CAL CS Transparent .png

Premixed Lime

Secil CAL CS

[Consolidation Mortar] Cal CS is a lime based preparation mortar before the application of a new coating.

CAL RJ Transparent .png

Premixed Lime

Secil CAL RJ

[RJ 35] A general purpose breathable lime mortar for building or pointing stone, brick and block. Ideal for conservation, restoration and newbuild.

CAL RB_edited.png

Premixed Lime

Secil CAL RB

Cal RB is specially designed for the maintenance and rehabilitation of buildings, being suitable for the levelling of old masonry or new construction.

CAL AC_edited.png

Premixed Lime

Secil CAL AC

Cal AC is a lime based finishing plaster generally used externally.

CAL AC FINO_edited.png

Premixed Lime

Secil CAL AC Fino

Cal AC Fino is a fine finishing lime plaster with smooth finish

SECILTEK REABILITA ISOVIT LIGHTFLEX - ISOVIT ECORK - CONTEC.png

Premixed Lime / Cork Based Bonding Mortar

Secil Isovit Lightflex

[ISOVIT E-CORK] is formulated from mixed binders, cork aggregates and Natural Hydraulic Lime. For bonding thermal insulation board.

Contec Conservation Technology Secil BeCork - Eco Cork.png

Insulated Lime Mortar

Secil BeCork Lime

Secil ecoCORK Lime is a lightweight render, formulated with natural cork aggregates, Natural Hydraulic Lime, lime aggregates and additions

Contec Conservation Technology Termointonaco.png

Insulation Render

Termointonaco

TERMOINTONACO is a nanotechnological thermo-insulating plaster based on a natural air-lime binder and lightened amorphous micro silica with high thermo-insulating and reflectance characteristics (the ability to reflect the heat back into the living area instead of letting it escape), with excellent thermal mass, acoustic soundproofing and fire resistance.

Contec Conservation Technology TermoRasante AeroGel.png

Super Insulation Render

TermoRasante AeroGel

The TermoRasante Aerogel is a super-insulating thermal plaster, a thermal bridging regulator, anti-condensation, anti-mould, highly breathable lime-aerogel thermal plaster. Due to its high aerogel content offers great insulation performance in a thin form factor, saving valuable space.

Contec Conservation Technology Heres RasoThermo AeroGel.png

Super Insulation Render

RasoThermo Aerogel

The RasoThermo Aerogel is a super-insulating, high performance lime-based thermal plaster, made from lime, aerogel and natural volcanic pozzolans, with a total of 14 carefully chosen ingredients. It provides exceptional thermal insulation in a thin, breathable layer due to its combination of premium insulating materials.

Prompt Cement Transparent.png

Adhesive Mortar [eco]

Prompt Natural Cement

Used to gauge traditional lime mortars and plasters, as well in situations that require rapid setting or exceptionally high compressive strengths

Mature Lime Putty.png

Non Hydrualic Lime

Lime Putty

Used mainly on historic buildings, soft masonry and where exact mortar matches are important

Lime Putty - Setting Stuff _edited.png

Non Hydrualic Lime

Setting Stuff

Final skim coat for lime plaster.

Lime Putty - Setting Stuff _edited.png

Non Hydrualic Lime

Quick Lime

High Calcium Quicklime Pebble and Powder, used for making lime putty and hot-mixed or hot-lime mortars.

Mature Lime Putty.png

Non Hydrualic Lime

Lime Wash

Historic Decorative / Protective coat for lime plaster.

Oak Riven Laths_edited.png

Wooden Laths

Oak Riven Laths

Provide extra grab for the fibrous lime plaster

Hessian _edited.png

Protective Covering for Fresh Mortar

Hessian Roll

Frost and Fire Protection for fresh lime mortar

Secil Mesh

Reinforcement mesh

Secil Mesh

100% fibreglass mesh with 160 g/m2 anti-alkaline treatment

Reinforcement Fibers

FiberFlex

Used to improve tensile strength and to reduce shrinkage cracking

Pigements

Natural Pigments

A range of pigmented natural additives traditionally used to modify the colour of lime mortars, allowing for a bespoke coloured finish.

Churn Brush - Long Short Handle_edited.png

Tapping Brush

Churn Brush

Churn brush, leaves a flush finish with an open texture.

Pointing iron _edited.png

Reinforcement Fibers

FiberFlex

Used to improve tensile strength and to reduce shrinkage cracking

bottom of page

function startup() { colorWell = document.querySelector("#colorWell"); colorWell.value = defaultColor; colorWell.addEventListener("input", updateFirst, false); colorWell.addEventListener("change", updateAll, false); colorWell.select();