RESTORING THE PAST, CONSERVING THE FUTURE
Oak Riven Laths | Natural Selection
Provide extra grab for the fibrous lime plaster
Container Size:
150ft
Approx Coverage:
1.5sq/m
RANGE OF USE
The purpose of the riven lath, as opposed to sawn lath, is to provide extra grab for the fibrous lime plaster. The splitting follows the grain down the wood and leaves an uneven 'reeded' surface. This means that the plaster will stick and grip, even on ceilings.
Related Products
Natural Hydraulic Lime - Interior - Skim Coat - Finishing Plaster
SECIL NHL 2
Secil 2 can be used for internal plastering. Can be used with fine sand for skim coat.
Natural Hydraulic Lime - Interior - Exterior - Pre-mix - Pointing
SECIL CAL RJ
A general purpose breathable lime mortar for building or pointing stone, brick and block. Ideal for conservation, restoration and newbuild.
Natural Hydraulic Lime - Interior - Pre-mix - Fine Finish
SECIL CAL AC FINO
Cal AC Fino is a fine finishing plaster with smooth finish
Natural Hydraulic Lime - Interior - Exterior - Rendering - Pointing - Bedding
RoundTower
NHL 3,5 WHITE
Used mainly for masonry and external plaster works. The most popular material for new build work.
Natural Hydraulic Lime - Interior - Pre-mix - Fine Finish
Setting Stuff
Final skim coat for lime plaster
Natural Hydraulic Lime - Interior - Exterior - Rendering - Reinforcement
FiberFlex
Used to improve tensile strength and to reduce shrinkage cracking
Natural Hydraulic Lime - Interior - Exterior - Additive - Pigment - Dye
Pigments
Colourants are traditionally used as additives to lime coatings to provide a coloured finish.
Natural Hydraulic Lime - Interior - Exterior - Rendering - Pointing - Bedding
SECIL NHL 3,5
Secil NHL 3,5 is ideally suited for bedding, rendering and pointing.
Natural Hydraulic Lime - Interior - Exterior - Pre-mix - Rendering
SECIL CAL RB
Cal RB is used for the conservation of old buildings and is also suitable for application onto substrates such as concrete, bricks or stone. etc.
Natural Hydraulic Lime - Interior - Pre-mix - Insulation Render
SECIL ecoCORK
Secil ecoCORK Lime is a lightweight render, formulated with natural cork aggregates, Natural Hydraulic Lime, lime aggregates and additions
Natural Hydraulic Lime - Interior - Exterior - Bedding - Quick - Strong
PROMPT Natural Cement
Used to gauge traditional lime mortars and plasters, as well in situations that require rapid setting or exceptionally high compressive strengths
Natural Hydraulic Lime - Interior - Rendering - Reinforcement
Oak Riven Laths
Provide extra grab for the fibrous lime plaster
Natural Hydraulic Lime - Interior - Exterior - Finishing
Churn Brush
Churn brush, leaves a flush finish with an open texture.
Natural Hydraulic Lime - Exterior - Rendering - Pointing - Bedding - Limecrete
SECIL NHL 5
Secil NHL 5 is normally used for flooring such as limecrete floors or in highly exposed locations such as chimney flaunching etc.
Natural Hydraulic Lime - Interior - Exterior - Pre-mix - Finishing
SECIL CAL AC
Cal AC is a finishing plaster generally used externally.
Natural Hydraulic Lime - Interior - Exterior - Rendering - Pointing - Bedding
RoundTower
NHL 3,5 GREY
Used mainly for masonry and external plaster works. The most popular material for new build work.
Natural Hydraulic Lime - Interior - Exterior - Pre- Mix - Rendering - Plastering - Lime Wash
Lime Putty
Used mainly on historic buildings, soft masonry and where exact mortar matches are important
Natural Hydraulic Lime - Exterior - Protection from Frost
Hessian Roll
Hessian Frost Protection roll
Natural Hydraulic Lime - Interior - Exterior - Pointing
Pointing Iron
Used to improve tensile strength and to reduce shrinkage cracking