Water & Damp

Water Protection Systems

Brick Buildings

Impregnation Sealers |  Tanking System |  Injection Systems

SNL Clear.png
mb 2k clear.png
ipe-BFL- trans.png

Impregnation Sealers

Thanks to hydrophobizing impregnation, the capillary water absorption of a façade through rain and splashwater is significantly reduced. The water repelling, hydrophobic treatment is therefore a sensible damage-preventing and/or supplementary measure.


Tanking System

Water and salt are responsible for most building damage. As a consequence, visible damp lines, destroyed joints, sanding or, in the worst case, can cause irreparable damage to the building's substance. In addition, brick walls saturated with moisture are harmful to users and residents. The basis for solving these kind of complex damage processes is good planning - the waterproofing concept.

SNL Clear.png
mb 2k clear.png

Injection Systems

Over the past few decades, injection procedures for the subsequent production of horizontal impervious layers in the brickwork have established and proven themselves. These are effective, clean and, in particular, inexpensive procedures. The latest development in this field is the revolutionary cream technology.

Rising Damp System

Non invasive Rising damp solution using The electrophysical principle or geomagnetic system. 

ipg-BFL-7 trans.png
Kiesol C clear.png
WP Sulfatex Clear.png

Rising Damp Solutions






Remmers Waterproofing & Tanking System

Remmers are renowned for their technical innovations in materials for facade restoration and protection. This includes systems for natural stone and brickwork, timber framed infill, rendered and reinforced concrete substrates. Heritage, traditionally built and modern structures all around the world are protected, successfully restored and refurbished with Remmers systems. 

One of the primary requirements for facades is the prevention of water ingress and the management of water and water vapour movement through and out of the building, particularly from the fabric of the building envelope. This is of course exactly the same for the foundations and any below ground areas of building structures.

Our Products

MB 2K.jpg


Multi-functional building waterproofing Combines the properties of flexible and crack-bridging mineral waterproofing grouts



Single-component, solvent-free, strengthening silicification concentrate

WP DS Levell

WP DS Levell

For levelling deeper lying joints and rough surfaces in masonry work

Funcosil SL.jpg

Clear, hydrophobising impregnation agent on a silane/siloxane base for limestone

Impregnation Primer.jpg

Impregnation Primer

Primer with hydrophobic effect

Contec-USP 100 Impregnation Treatment.png

Impregnation Treatment

USP-100 Impregnation Treatment impregnation prevents ingress of most types of urban contamination, including oils and graffiti to wall, paving and roof, porous building substrates.

Primer Hyrdo HF.jpg

Primer Hydro HF

Aqueous deep primer with strengthening and hydrophobising properties

IR PUR 2K 150.jpg

IR PUR 2K 150

Highly flexible 2K PU injection resin, D-I (P)




Kiesol MB.jpg

Kiesol MB

Primer for MB 2K 

WP Sulfatex.jpg

WP Sulfatex Grout

For subsequent cellar waterproofing from the interior against ground damp, non-standing or standing seepage water, water pressure and water acting from behind

Funcosil SNL.jpg

Clear, hydrophobising, solvent-based impregnation on a silane/siloxane base

Funcosil AG.jpg

Funcosil AG

Oleophobic and hydrophobic protective impregnation


Funcosil FC

For hydrophobizing impregnation of porous, cementitious building materials such as brick, clinker, sand-lime .Etc.

Contec-USP 400 Colour Enhancer.jpg

Colour Enhancer

Contec USP-400 Colour Enhancer is an aqueous fluoropolymer dispersion that enhances the colour of natural stone and porous building substrates.


Primer Hydro S F

Mineral primer with highly strengthening effect

IR PUR 250.jpg

IR PUR 250

Flexible, moisture-reactive 1K PU injection resin, D-I (P)




Kiesol C.jpg

Kiesol C

Used for horizontal barriers against rising damp

WP Sulfatex Rapid.jpg

WP Sulfatex Rapid

Waterproofing mortar in a grouting and filling consistence for fast and reliable waterproofing of buildings

Funcosil SNL.jpg

Clear, hydrophobising impregnation on a silane/siloxane base with odourless solvents

Funcosil WS.jpg

Funcosil WS

Hydrophobising impregnation on a silane/siloxane base in aqueous emulsion form


Funcosil OFS

Used for treating mineral building materials 

Funcosil AS.jpg

Funcosil AS

Hydrophobising impregnation based on siloxane/acrylate, with a colour-intensifying and slightly strengthening effect

SP Top White .jpg

SP Top White 

WTA-compliant restoration plaster for masonry with moisture and salt loads

Tapre VF 120.jpg

Tape VF 120

High-quality, premium sealing tape based on nitrile rubber and coated with non-woven fabric

function startup() { colorWell = document.querySelector("#colorWell"); colorWell.value = defaultColor; colorWell.addEventListener("input", updateFirst, false); colorWell.addEventListener("change", updateAll, false); colorWell.select();