HeliBond is an injectable, non-shrink, thixotropic, cementitious grout that rapidly develops compressive strength.

Helifix HeliBar stainless steel helical bars in conjunction with plastic debonding sleeves can be used to create a movement joint in an existing wall.

CemTie is a versatile, fully grouted, remedial helical tie used to stabilize all forms of solid masonry, secure failed lintels and brick rings, reconnecting separated internal and external building walls and repair parapets.

Helifix Crack Stitching Kit - Provides everything you need for quick repairs and stabilizes cracked masonry.

Helifix Masonry Drill Bits

Hole Cleaning Brush for cleaning out pilot holes before the insertion of metal remedial components.

PolyPlus is a general purpose, two part, nozzle-mixed polyester resin for securing remedial wall ties and resin bonded anchors.

BowTie is a long stainless steel retrofit helical tie used for stabilizing bowing / bulging walls, without any external plates, by securing and anchoring them to internal floor and ceiling joists.

DryFix is a slim, versatile and rapidly installed mechanical pinning and remedial tying system that requires no resin, grout or mechanical expansion.

Use HeliBond Grout with Manual Pointing Gun

For installing the DryFix pinning and tying system; InSkew warm roof batten fixing; TurboFast timber/MDF to masonry fixing

Helical stainless steel reinforcing bar, with substantial tensile properties, used for strengthening and stabilizing masonry in both new build and remedial situations.

Heavy Duty Remedial ties for restraining bowed walls.

Extensive range of mechanical grouted sock anchor systems for stabilising damaged masonry

HeliBar Insertion Tool is used to push the helibars ino place.

CemTie pinning nozzles are available in 15.0mm diameters and the length is made to suit the CemTie. The cone nozzle must be drilled out to accept the 15mm pinning nozzle.